Ricoh Pro C9200 Series - 0608 Punch Position: With Feed; 0609 Punch Skew Correction

CIP Training
Pro C9200 series
Adjustment Settings for Operators
CIP Training C7200 series
Adjustment Settings for Operators
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
2 Holes JP / EU
3 Holes US
4 Holes EU
4 Holes NE
2 Holes US
0.0 2.0 -
2.0 0.5 mm
0608 Punch Position: With Feed
Adjust the horizontal position of the punch holes when using Finisher SR5050 or
Booklet Finisher SR5060.
Press [ + ] to move the position toward the top edge (left) relative to the paper
feed direction, or [ - ] to move it toward the bottom edge (right).
Paper feed direction
Paper feed direction
2 Holes Top
2 Holes Left
CVK008
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
2 Holes JP / EU
3 Holes US
4 Holes EU
4 Holes NE
2 Holes US
0.0 4.0 -
4.0 0.5 mm
0609 Punch Skew Correction
Specify whether or not to correct the punch skew when using Finisher SR5050 or
Booklet Finisher SR5060.