Ricoh Pro C9200 Series - Machine: Maintenance; 0505 Temperature; Humidity Inside; 0506 Temperature; Humidity Outside; 0507 Screw-on Cap to Replace

CIP Training
Pro C9200 series
Adjustment Settings for Operators
CIP Training C7200 series
Adjustment Settings for Operators
Machine: Maintenance
0505 Temperature / Humidity Inside
Display the internal temperature and humidity.
Report this information if your service representative requests it.
Setting Items Remarks
PCU 1 Temperature
PCU 1 Humidity
PCU 2 Temperature
PCU 2 Humidity
Value display only.
0506 Temperature / Humidity Outside
Display the external temperature and humidity.
Report this information if your service representative requests it.
Setting Items Remarks
Temperature
Humidity
Value display only.
0507 Screw-on Cap to Replace
Close the Toner Bottle Cap.
The Toner Bottle in use can be pulled out when the Cap is closed. Use it when you
want to replace the Toner Bottle.
Setting Items Description
Black 1
Black 2
Cyan 1
Cyan 2
Magenta 1
Magenta 2
Yellow 1
Yellow 2
Press [Execute] to execute the function.
Open the toner bottle cover (the cover of the
toner dispensing section) before executing this
function.
Afterward, remove the toner bottle by pushing
the knob below the bottle.