CIP Training Pro C9200 series
Adjustment Settings for Operators
CIP Training C7200 series
Adjustment Settings for Operators
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
A3 SEF
B4 JIS SEF
A4 SEF
B5 JIS SEF
12 × 18 SEF
11 × 17 SEF
8
1
/
2
× 14 SEF
0.0 4.0 -4.0 0.2 mm
8
1
/
2
× 11 SEF 0.0 4.0 0.0 0.2 mm
8K SEF
Other Paper Sizes
0.0 4.0 -4.0 0.2 mm
0713 Double Parallel Fold Position 1
Adjust the fold position (S1) of the bottom segment 1 of double parallel-folded sheets when
using the fold unit.
Press [ + ] to increase and [ - ] to reduce (S1).
The mark indicates the leading edge (relative to the paper feed direction), and the mark
indicates the trailing edge. The illustration below shows a gatefold sheet partially opened in the
half-folded state.
Paper feed direction
S1
L1
DWP565
To Next Page
Loading...
