Connecting
Ethernet -
Ethernet Connection
1. Open the port cover
2. Plug the Ethernet cable into the
Port
3. Connect the other end of the
cable to the printer’s network,
such as to a hub. Check the LEDs
on the Ethernet port
1. Indicator (green): Lights
whenever the printer is properly
connected to the network
2. Indicator (yellow): Lights
whenever the printer is sending
or receiving data via the network
4. Close port cover
*If Static IP Address, click link for
details
1 2
Connecting printer via
Ethernet
1 2
3 4
To Next Page
Loading...
