Connecting Ethernet -
Confirm the Printer’s
IP address
1. Press the [Power] key
2. Press the [▾/Menu] key
3. Press the [▴] or [▾/Menu] key to
display the [Host Interface] menu, and
then press [#Enter] key
4. Press the [▴] or [▾/Menu] key to
display [Network Setup], and then press
[#Enter] key
5. Press the [▴] or [▾/Menu] key to
display [IPv4 Address], and then press
[#Enter] key
6. After you have recorded the IPv4
Address, press the [Escape] key
1. This may be needed during driver
installation
<Menu>
Host Interface
<Host Interface>
Network Setup
<Network Setup>
IPv4 Address
<IPv4 Address>
XXX.XXX .XXX.XXX
1
2
3 4
5
6
6
To Next Page
Loading...
