Ricoh Ri 100 - Control Panel Network Setup - Static IPv4 - IPv4 Subnet Mask - 2

Control Panel Network
Setup - Static IPv4 - IPv4
Subnet Mask - 2
20. Press the [▴] or [▾/Menu] key
to enter the left most entry field
of the Subnet Mask, and then
press the [#Enter] key
A. To get an Subnet Mask Address
for the printer, contact your
network administrator.
B. The value moves by 10 if the [▴]
or [▾ /Menu] key is kept pressed.
21. Press the [#Enter] key
A. The entered value is confirmed,
and the cursor moves to the next
field
B. To return to the previous field,
press the [Escape] key.
22. Specify values in all fields, and
then press the [#Enter] key.
20
21
<Subnet Mask>
255.255.12█ .000
<Subnet Mask>
255.255.1█2 .000