Ricoh Ri 100 - Control Panel Network Setup - Static IPv4 - IPv4 Gateway Address - 2

Control Panel Network
Setup - Static IPv4 - IPv4
Gateway Address - 2
1. Press the [▴] or [▾/Menu] key to enter
the left most entry field of the IP
address, and then press the [#Enter]
key
A. To get an Gateway Address for the
printer, contact your network
administrator.
B. The value moves by 10 if the [▴] or [▾
/Menu] key is kept pressed.
2. Press the [#Enter] key
A. The entered value is confirmed, and
the cursor moves to the next field
B. To return to the previous field, press
the [Escape] key.
3. Specify values in all fields, and then
press the [#Enter] key.
4. print the configuration page to confirm
the specified settings.
28
<IPv4 Gateway.Ad.>
192.02█ .033.044
<IPv4 Gateway.Ad.>
192.022. █ 33.044
29