Ricoh Ri 100 - Installation Requirements and Checks

Wireless Easy Setup –
PBC - 1
1. Press the [Power] key
2. Press the [▾/Menu] key
3. Press the [▴] or [▾/Menu]
key to display the [Host
Interface] menu, and then
press [#Enter] key
4. Press the [▴] or [▾/Menu]
key to display [Wireless Lan],
and then press [#Enter] key
5. Press the [▴] or [▾/Menu]
key to display [Easy Setup],
and then press [#Enter] key
6. Press the WPS button on the
wireless access point/router
<Menu>
Host Interface
<Host Interface>
Wireless LAN
<Wireless LAN>
Easy Setup
WPS
1
2
3
4
5
6