Ricoh Ri 100 - Wireless Easy Setup - Pin Method - 2

Wireless Easy Setup –
Pin Method - 2
8. Enter the Printer's PIN on the wireless
access point/router web page.
A. For details, see the manual supplied
with the wireless LAN wireless access
point/router.
9. Execute WPS (PIN system) from the
wireless access point/router's web
page.
10. Press the [Escape] key.
11. Press the [▴] or [▾/Menu] key to
display [PIN Method], and then press
[#Enter] key
A. If the connection attempt has failed,
press the [#Enter] key again. If the
problem persists, check whether the
wireless access point/router is working
properly.
B. Configuration is complete when
connection to the wireless access
point/router is confirmed.
<Easy Setup>
PIN Method
CHV609
10
8-9
11