Ricoh Ri 100 - Wireless Easy Setup - PBC - 2

Wireless Easy Setup –
PBC - 2
7. Press the [▴] or [▾/Menu] key to
display [PBC Method], and then press
[#Enter] key
A. If the wireless access point/router
cannot be detected within 120
seconds, the search session expires.
B. If the connection attempt has failed,
press the [#Enter] key again. If the
problem persists, check whether the
wireless access point/router is working
properly.
8. Configuration is complete when
connection to the wireless access
point/router is confirmed.
9. After you have made all the settings,
press the [Escape] key.
10. Print the configuration page to check
whether the printer has successfully
connected to the wireless access
point/router.
WPS
<Easy Setup>
PBC Method
6
7
8