Ricoh Ri 100 - Web Image Monitor - Configure WLAN - Confirm the Printer’s IP address

Web Image Monitor -
Configure WLAN -
Confirm the Printer’s IP
address
1. Press the [Power] key
2. Press the [▾/Menu] key
3. Press the [▴] or [▾/Menu] key
to display the [Host Interface]
menu, and then press [#Enter]
key
4. Press the [▴] or [▾/Menu] key
to display [Network Setup], and
then press [#Enter] key
5. Press the [▴] or [▾/Menu] key
to display [IPv4 Address], and
then press [#Enter] key
6. After you have recorded the IPv4
Address, press the [Escape] key
<Menu>
Host Interface
<Host Interface>
Network Setup
<Network Setup>
IPv4 Address
<IPv4 Address>
XXX.XXX .XXX.XXX
1
2
3 4
5
6
6