Ricoh Ri 100 - Control Panel and Power Management

Control Panel Network
Setup - Static IPv4 - IPv4
Subnet Mask - 1
15. Press the [Escape] key.
16. Press the [▾/Menu] key
17. Press the [▴] or [▾/Menu]
key to display the [Host
Interface] menu, and then
press [#Enter] key
18. Press the [▴] or [▾/Menu]
key to display [Network
Setup], and then press
[#Enter] key
19. Press the [▴] or [▾/Menu]
key to display [IPv4 Subnet
M.], and then press [#Enter]
key
<Menu>
Host Interface
<Host Interface>
Network Setup
16
17
18
19
15
<Network Setup>
IPv4 Subnet M.