Ricoh Ri 100 - Wireless Easy Setup - PBC - Print Configuration page

Wireless Easy Setup –
PBC - Print
Configuration page
1. Load print media (A4 or letter size
paper) in the cassette
2. Press the [▾/Menu] key
3. Press the [▴] or [▾/Menu] key to
display [List/Test Print], then press the
[#Enter] key
4. Press the [▴] or [▾/Menu] key to
display [Config. Page], and then press
the [#Enter] key
5. Press the [Start] key. The Configuration
page is printed
6. Set another print media
7. Print all configuration pages by
repeating steps 5 and 6
8. Press the [Escape] key
<Menu>
List/Test Print
<List/Test Print>
Config. Page
2
3 4
5
8