Delivering Scan Files
92
4
Selecting destinations by entering their registration numbers
Select a destination by entering its Short ID number (registered using the Scan-
Router delivery software). For details about how to set Short IDs, see the manu-
als supplied with the ScanRouter delivery software.
A Press [Reg. No.].
B Using the number keys, enter the three-digit registration number, and then
press {q}.
You can also enter a registration number of fewer than three digits.
Example: To enter 009
Press {9}, and then press {q}.
C Press [OK].
By pressing [Change], you can change the selected destination.
Note
❒ To cancel a selected destination, press [U] or [T] next to the destination
field to scroll through the destinations until the one you want to cancel ap-
pears, and then press {Clear / Stop}.
To Next Page
Loading...
