Ricoh Scanner - Using a Registration Number to Specify a Sender Name

Sending Scan Files by E-mail
28
1
Using a Registration Number to Specify a Sender Name
Select the sender from the destination list according to the registration number.
A Press [Sender Name].
B Press [Registration No.].
C Using the number keys, enter the five-digit registration number assigned
to the required destination folder.
If the entered number is less than five digits, press {q} after the last number.
Example: To enter 00006
Press {6}, and then press {q}.
D Press [OK] twice.
By pressing [Change], you can change the selected destination.