Setting of Original Feed Type
119
6
Setting of Original Feed Type
This section explains Original Feed Type settings such as orientation and scan
sides of originals.
Original Orientation
This section explains how to correctly display the top/bottom orientation of
scanned originals on a client computer screen.
A Press [Original Feed Type].
B Press [] or [] to select the same orientation as that of original.
C Press [OK].
Placing Originals
To correctly display the top/bottom orientation of the scanned original on a cli-
ent computer, the placement of the original and the settings made on the control
panel must match.
Place originals correctly by referring to the following table:
❖ Exposure Glass
Original orientation Control Panel Key
top edge touches top left corner of exposure
glass
top edge touches rear of exposure glass
To Next Page
Loading...
