Various Scan Settings
136
6
Programs
You can register frequently used settings in the machine memory and recall
them for future use.
Note
❒ You can register up to 10 programs for the scanner mode.
❒ Programs are not deleted by turning the power off or by pressing {Clear
Modes} unless the content is deleted or newly registered.
❒ The following settings can be registered to programs: Scan Settings, 1 Sided
/2 Sided Original, Top to Top/Top to Bottom, skip scanning back side of the
last page, Divide, Original Orientation, File Type, Batch / SADF, Stamp, Store
File, Preview, and Reception Notice.
❒ Setting made on the simplified display cannot be registered to a program.
To Next Page
Loading...
