8
❖ Transmission File Status
1. Date/Time
Displays the time and date transmission
was specified by this machine or the time
and date when Completed, Error, or Can-
celled was confirmed.
2. Transmission function icon
Displays the icon of the transmission
function used.
3. Destination
Displays the transmission destination.
If you have selected multiple destina-
tions, the first selected destination is dis-
played.
Other destinations appear as “+ X”. (X in-
dicates the number of destinations.)
4. Sender
Displays the sender name.
5. File Name
Displays the stored file name of files that
are simultaneously sent and stored, or of
stored files that are sent.
6. Status
Displays one of the following transmis-
sion statuses: Completed, Sending...,
Waiting..., Error, or Cancelled.
7. [Stop TX]
To cancel transmission, select a file
whose status is [Waiting...], and then press
[Stop TX].
8. [Print List]
Press to print transmission results.
Note
❒ You cannot check scanner function transmission results by pressing [Job List]
at the bottom of the screen. To check transmission results, press [Scanned Files
Status], and then display the Transmission File Status screen.
❒ Depending on security settings, some transmission results might not be dis-
played.
ARE009S
To Next Page
Loading...
Need help?
General