Registration
Follow the procedure below to adjust where to start printing on paper loaded in each paper tray after
checking the test pattern printed.
1. Press the [ /Menu] key.
2. Press the [ ] or [ /Menu] key to display [Maintenance], and then press the [#Enter] key.
Menu:
Maintenance
3. Press the [ ] or [ /Menu] key to display [Registration], and then press the [#Enter] key.
Maintenance:
Registration
4. Press the [ ] or [ /Menu] key to display [Pr.Test Pattern], and then press the [#Enter]
key.
Registration:
Pr.Test Pattern
5. Press the [ ] or [ /Menu] key to select a paper tray, and then press the [#Enter] key.
Pr.Test Pattern:
Tray 1
A test pattern to adjust the print start position is printed.
Check the optimal adjustment values on the printed test pattern.
6. Fold the test pattern sheet in half lengthwise.
To Next Page
Loading...
