Setting Name Default
SSID blank
Security Method Not Active
Easy Setup -
To specify the wireless LAN settings, select either [Easy Setup] or [SSID].
If you select [SSID], specify [Security Method].
Setting the Easy Setup
Select [Easy Setup] if you want to configure wireless LAN settings using Wi-Fi Protected Setup (WPS).
Select either [PBC Method] or [PIN Method] that is correct to network connection via the access points
you can use.
For details about the configuration and functions of the wireless LAN access point or router in use, see
the manual supplied with the device.
PBC Method
1. Start the wireless LAN access point.
2. Switch on the machine.
3. Press the access point button.
4. Press the [
/Menu] key.
5. Press the [ ] or [ /Menu] key to display the [Host Interface] menu, and then press the
[#Enter] key.
Menu:
Host Interface
6. Press the [ ] or [ /Menu] key to display [Wireless LAN], and then press the [#Enter] key.
Host Interface:
Wireless LAN
7. Press the [ ] or [ /Menu] key to select [Easy Setup], and then press the [#Enter] key.
Wireless LAN:
Easy Setup
8. Press the [ ] or [ /Menu] key to select [PBC Method], and then press [#Enter] key.
Easy Setup:
PBC Method
Connecting the Computer and Installing the Software (Network Connection)
61
To Next Page
Loading...
Need help?
General
