Uni-direct.Prt.
You can configure the machine to eject ink only when the head is moving in a particular direction.
Normally, the way the ink is ejected depends on the paper type.
For example, printing is usually bidirectional if [Plain] has been selected in the printer driver.
However, if you select [Always], even plain paper will be printed unidirectionally.
By printing unidirectionally, you can eliminate differences in ink ejection timing and so prevent
misregistration when printing thin ruled lines.
If you select [Driver Setting], printing is done according to the paper type selected in the printer
driver.
Default: [Driver Setting]
Density
You can adjust the density of the printing color.
(mainly Europe and Asia)
Default: [Standard]
(mainly North America)
Default: [Dark]
Color Mode
You can select the default color mode.
Default: [Color]
Recycl.Ppr.Mode
You can enable this to print on recycled paper.
Default: [Off]
Ppr. Size Error
This function enables the printer to notify users if the paper in the tray does not match the paper size
specified in the [Paper Input] menu.
If you select [Do not Display], even if the paper size does not match, printing proceeds without an
error being displayed.
Default: [Display]
Pg Recov. Error
You can specify whether or not [Page Recovery Error] is reported.
Default: [Display]
Ink C.U. Space
You can check the remaining capacity of the ink collector unit.
Using the [System] Menu
147
To Next Page
Loading...
