You can specify [DIPRINT], [LPR], and [IPP].
[Security] area
• [Network Security] page
• [SSL/TLS Version]
You can specify [TLS1.1], [TLS1.0], and [SSL3.0].
• [Encrypted Communication Settings]
You can specify [AES], [3DES], and [RC4].
• [Access Control] page
• [IPv4]
You can configure up to five access control ranges.
• [IPv6]
You can configure up to five [Range] and [Mask] settings.
• [IPP Authentication] page
You can configure up to ten [Authentication], [User Name], and [Password] settings.
• [SSL/TLS] page
You can specify [SSL/TLS(443)] and [Permit SSL/TLS Communication].
• [Site Certificate] page
• [Imported Site Certificate]
You can select [Delete] or [Update to Trustworthy Certificate] for an imported site
certificate.
• [Site Certificate to Import]
Import the site certificate according to the displayed instructions.
• [Device Certificate] page
You can select [Create], [Request], [Install], [Install intermediate Certificate], [Delete/Cancel
Request], and [Delete intermediate Certificate] for up to three certificates.
• [Certification]
Select the certificate to be used in [SSL/TLS], [Wireless LAN], and [IPsec].
• [IPsec] page
You can specify [IPsec].
You can configure up to ten parameters.
5. Monitoring and Configuring the Machine
168
To Next Page
Loading...
Need help?
General
