Ricoh SG 3110DN User Manual

2. Plug the power cord fully into the wall outlet.
CHU048
The surface should be level within two degrees.
Make sure the power cord is not trapped under the machine.
3. Press the [Power] key.
CTW008
The machine starts feeding ink into its print heads.
Leave the machine idle for about six minutes until the message "Ready" appears.
Do not remove the plug from the wall outlet while the ink is being fed.
You might hear a clicking sound while the print heads are being filled. This is not a malfunction and
it will stop after a while.
When ink is completely fed, the [Power] key stops flashing and remains lit.
Plugging in the Power Cord and Turning the Power On
49

Ricoh SG 3110DN Specifications

General

Paper Capacity	250 sheets
Connectivity	USB 2.0, Ethernet
Duplex Printing	Yes
Operating System Compatibility	Windows, Mac OS, Linux
Print Resolution	3600 x 1200 dpi
Print Speed	29 pages per minute
Paper Size	A4, A5, A6, B5
Print Technology	Gel-based inkjet