Specifications of the Machine
This section lists the machine's specifications.
General Function Specifications
Item Description
Configuration Desktop
Print process Laser electrostatic transfer
Maximum paper size for printing 216 mm × 356 mm (8.5 × 14 inches)
Warm-up time (23 °C, 71.6 °F) 25 seconds
Paper sizes For details, see page 30 "Supported Paper".
Paper type For details, see page 30 "Supported Paper".
Paper output capacity (80 g/m
2
, 20
lb)
50 sheets
Paper input capacity (80 g/m
2
, 20 lb) • Tray 1
150 sheets
•
Bypass tray
1 sheet
Memory 128 MB
Power requirements
220-240 V, 5 A, 50/60 Hz
120-127 V, 8 A, 60 Hz
If the voltage supplied to the machine is outside the
guaranteed operating range, "SC560" appears on the
screen. If this happens, turn the power off and then back on.
If the message does not disappear, contact your service
representative.
8. Appendix
100
To Next Page
Loading...
