Basic Operation of Printing
The following procedure explains how to perform basic printing.
For details of printing options, see the printer driver Help.
The procedure in this section is an example based on Windows 7. The actual procedure may vary
depending on the operating system you are using.
1. Open the printer properties dialog box in your document's application.
For details about each setting, click [Help]. You can also click the information icons to show
configuration information.
2. Set printing options as necessary, and then click [OK].
The printer properties dialog box closes.
3. Click [Print].
• If a paper jam occurs, printing stops after the current page has been printed out. After the jammed
paper is removed, printing restarts from the jammed page automatically. For details about how to
remove the jammed paper, see page 71 "Clearing Misfeeds".
Canceling a Print Job
You can cancel print jobs using either the machine's control panel or your computer, depending on the
status of the job.
3. Printing Documents
40
To Next Page
Loading...
