Problem Solution
Paper gets wrinkles. • Paper is damp. Use paper that has been stored properly.
See page 30 "Supported Paper".
•
Paper is too thin. See page 30 "Supported Paper".
• If there are gaps between the paper and the paper
guides, adjust the paper guides to remove the gaps.
The printed paper is curled. • Load the paper upside down in the paper tray.
•
If the paper curl is severe, take prints from the output tray
more frequently.
• Paper is damp. Use paper that has been stored properly.
See page 30 "Supported Paper".
Images are printed diagonally to the
pages.
If there are gaps between the paper and the paper guides,
adjust the paper guides to remove the gaps.
6. Troubleshooting
78
To Next Page
Loading...
