Ridder HortiJetPro - Guidelines and Standards; Packaging, Storage and Shipment

Please contact Ridder Growing Solutions if this label is missing.
2.5.3 Guidelines and standards
The HortiJet conforms to the essential requirements of the guidelines mentioned
below, and their adaptation guidelines.
Guidelines:
EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
Machine Directive 2006/42/EC
The following standards have been consulted to evaluate conformity:
NEN-EN-IEC 62368-1:2014 en
NEN-EN-IEC 61000-6-1:2007 en
NEN-EN-IEC 61000-6-3:2007 en
NEN-EN-ISO 12100:2010 en
NEN-EN-IEC 60204-1:2006 en
NPR-CEN Guide 414:2014 en
2.6 Packaging, storage and shipment
2.6.1 Packaging
The HortiJet Pro is shipped in one or more large pieces and includes a number of
boxes containing separate components.
2.6.2 Transport
To prevent damage during transport, certain components are shipped separately.
Make sure that these components are installed correctly.
Other information, such as temperature requirements, can be found in "Installation
requirements" on page22.
Please consider your own safety and that of others when loading, unloading and
moving the unit.
Be particularly mindful of the risk of the unit falling or sliding accidentally. Only
use vehicles that are suitable for transporting the HortiJet Pro. Please take into
account the weight and centre of gravity of the HortiJet Pro during transport.
HortiJet Pro
18