2.6.3 Storage
Store the product and the separate components in a dry and dust-free environment.
Do not expose products to direct sunlight. Keep the various components in their
original packaging for as long as possible. Section "Installation requirements" on
page22 provides a complete overview of the requirements for installing the HortiJet
Pro.
Please also read the warning in section "Connecting the pH sensor" on
page29. This warning applies specifically to the transport and storage of the
pH sensor.
2.7 Recycling and disposal
When your HortiJet Pro unit has reached the end of its service life, you should dispose
of it yourself.
Bear in mind that the pipes may still contain fertilizer residues.
Steps for pumping the pipes empty.
1. Pump the residual fertilizer into labelled containers.
2. Rinse the pipes with plenty of water.
3. Dispose of the containers in the prescribed manner.
Dispose of the containers in accordance with the applicable regulations in your
country. Consult the safety data sheets provided by the producers of the substances
or equipment you are disposing of and follow the safety instructions specified. Also
see the chapter "Safety" on page20.
HortiJet Pro
19
To Next Page
Loading...
