Need help?Do you have a question about the Ridder VitaLite-E and is the answer not in the manual?
Provides an overview of the manual's purpose and scope.
Details the manual's objectives for users and installers.
Identifies the intended audience for the manual.
Explains symbols and notations used throughout the document.
Lists related documentation provided with the unit.
Visual diagram of the unit's layout and components.
Lists and describes the essential components of the unit.
Details the functionality and types of I/O modules used.
Specifies the designed purpose and application of the VitaLite-E and C.
Covers certificates, stickers, and OEM information.
Guidelines for handling and storing the product.
Procedures for end-of-life product management.
Outlines essential safety and regulatory guidelines.
Lists necessary PPE for safe operation.
Details hazards and precautions related to UV-C radiation.
Safety measures for using chemicals like acids.
Instructions for immediate shutdown in emergencies.
Specifies conditions for successful unit installation.
A step-by-step guide to verify installation tasks.
Details on plumbing and water connections.
Instructions for electrical wiring and connections.
Setup for the acid dosing system.
Installation and setup of EC sensors.
Procedures for fitting UV reactor components.
Covers connecting external software or interfaces.
How to use the unit's control panel interface.
Procedures for initial unit setup and configuration.
Verifying unit functionality after installation.
Methods for testing water quality.
How to turn the unit on and off.
Controls for water and chemical pumps.
Detailed steps of the disinfection cycle.
Procedure for cleaning filters.
Procedure for cleaning quartz tubes.
Precautions before performing maintenance.
Routine inspection and cleaning tasks.
Routine inspection and cleaning tasks.
Annual inspection and servicing tasks.
Settings for date, time, and notifications.
Settings for unit activation and identification.
Configuration for network and Synopta connectivity.
Settings for input/output modules.
Configuration for data backup.
Configuration for control mode, safeguards, and characteristics.
Configuration for water treatment groups.
Configuration for the quartz tube cleaning process.
Configuration for filter maintenance.
Configuration for water level monitoring in tanks.
Configuration related to UV lamps.
Wiring details for module ID 1 inputs.
Wiring details for module ID 1 outputs.
Wiring details for module ID 2 outputs.
Wiring details for module ID 2 inputs.
Wiring details for module ID 3 outputs.
Wiring details for module ID 3 inputs.
Wiring details for module ID 4.
General| Brand | Ridder |
|---|---|
| Model | VitaLite-E |
| Category | Farm Equipment |
| Language | English |
To Next Page
