Ridder VitaLite-E - Backup Settings; Unit Specific Settings

<M> Settings / General / I/O / Modules
Remove module
Firmware 0
Firmware 1
Firmware 2
8.4.2 Control outputs
<M> Settings / General / I/O / Control outputs
Name
The name of the control output in question.
Value
Range
Location
8.5 Backup settings
<M> Settings / General / Backup settings
Location
l DiskOnModule: backup…
l DisplayBoard: backup…
Read
Write
8.6 Unit
<M> Settings / Unit
Control mode
Safeguards
Characteristics
8.6.1 Control mode
<M> Settings / Unit / Control mode
Control mode
l Manual: Processes can only be started manually.
l Auto: Processes will start automatically depending on the
preset start conditions.
When switching to manual mode, queued processes will be removed.
After switching to manual mode, any processes placed in the queue
manually will be retained and carried out.
VitaLite
67