Contents
1 Introduction to this manual
6
1.1 Introduction
6
1.2 Aims
6
1.3 Target groups
6
1.4 Symbols and annotations
6
1.5 Documentation overview
7
2 Product information
8
2.1 Schematic representation of the unit
8
2.2 Basic configuration
9
2.3 Description of I/O modules
9
2.3.1 Replacing I/O modules
10
2.3.2 Removing I/O modules
11
2.4 Intended use
12
2.5 Other product characteristics
12
2.5.1 Type plate
13
2.5.2 Quality control
13
2.5.3 Components, stickers and names
14
2.5.4 Certificates and declarations
16
2.5.5 Original Equipment Manufacturers (OEM) information
16
2.6 Packaging, storage and shipment
17
2.7 Recycling and disposal
17
3 Safety precautions and requirements
19
3.1 General safety requirements
19
3.2 Personal protective equipment
19
3.3 UV-C radiation
20
3.4 Chemicals
21
3.5 Emergency stop
21
4 Installation procedure
22
4.1 Installation requirements
22
4.1.1 Dealer/installer requirements
22
4.1.2 Installation requirements
22
4.1.3 Water installation requirements
24
4.1.4 Electrical installation requirements
24
4.1.5 Requirements for installing water tank sensors
24
4.2 Installation checklist
25
4.3 Connecting water components (water installation)
27
4.3.1 Pre-blending control (optional)
28
4.3.2 Filters
28
4.4 Connecting electrical components
29
4.5 Connecting acid dosing components
29
4.5.1 pH calibration
31
4.6 Connecting EC sensors (if present)
31
4.6.1 EC calibration
31
4.7 Installing quartz tubes and lamps
32
4.7.1 Installing quartz tubes
32
4.7.2 Quartz tube breakages
35
4.7.3 Pressurizing the unit
36
4.7.4 Installing UV-C lamps
37
4.8 Other installation work
38
To Next Page
Loading...
