2.5.1 Type plate
Every modular component of the unit is provided with a type plate. Each type plate
contains the following information:
1 Honderdland
131
2676 LT
Maasdijk
Nederland
www.ridder.com
7
Date:YYYYMMDD
Type 2 XXXXXXXX 8
Version 3
S/N 4 U 9 12
Range 5 F 10
Fuse 6 P 11
1 Name and address of the manufacturer /
supplier and their logo
7 CE marking and removal logo
2 Type description 8 No...
3 Version 9 Voltage (U) in VAC
4 Device serial number 10 Frequency in Hz
5 Temperature range in °C 11 Power in watts
6 Fuse in amperes 12 QR code (optional)
The type plates of certain components also specify the version number of the
software installed.
2.5.2 Quality control
Every Ridder Growing Solutions unit is checked and tested for correct operation
before shipment. The corresponding certificate can be found in the documentation
included with the unit.
A control cabinet that passes our quality inspection is provided with the label below on
the inside of the cabinet. Please contact Ridder Growing Solutions if this label is
missing.
VitaLite
13
To Next Page
Loading...
