Figure 5-6: Post-flushing after cleaning quartz tubes
5.3.3 Manually start filter flushing
M Settings / Filter flushing / Control / Manual control
Each filter is flushed individually. Activate the VitaLite-E and C manually and check
the VitaLite-E and C for the following points:
Are all the valves working correctly?
Is the pump running? Is the flow rate sufficient?
Are both filters flushed one after the other?
Figure 5-7: Back-flushing filter 1 and filter 2
VitaLite
47
To Next Page
Loading...
