EasyManua.ls Logo

Ridder VitaLite-E - Drain Tanks

Ridder VitaLite-E
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Figure 8-1: Water tank schematic with corresponding measurements
The following measurements are used for the water tanks:
Size Description
h
100%
Height at maximum range of the sensor (20 mA). The sensor may
have a higher range than the actual height of the tank.
h
s
Height of the tank.
h
max
Maximum allowed height of water in the tank.
h
min
Minimum required height of water in the tank.
V
min
Minimum required volume of water in the tank.
V
m
Measured volume of water.
V
max
Maximum allowed volume of water in the tank.
8.10.1 Drain tanks
<M> Settings / Drain tank
Minimum volume [m3]
Here you enter the minimum volume of water (in cubic
metres) that the drain tank must contain.
V
min
Maximum volume [m3]
Here you enter the maximum volume of water (in cubic
metres) that the drain tank may contain.
V
max
Height of minimum level [m]
Here you enter the height of the water level (in metres) at
which the minimum volume of water is measured in the
drain tank.
h
min
VitaLite
89

Table of Contents

Related product manuals