2.6 Packaging, storage and shipment
2.6.1 Packaging
The VitaLite-E and C is shipped in one or more large crates and includes a number of
boxes containing separate components.
2.6.2 Transport
To prevent damage during transport, certain components are shipped separately.
Make sure that these components are installed correctly.
Other information, such as temperature requirements, can be found in "Installation
requirements" on page22.
Please consider your own safety and that of others when loading, unloading and
moving the unit.
Be particularly mindful of the risk of the unit falling or sliding accidentally. Only
use vehicles that are suitable for transporting the VitaLite-E and C. Please take
into account the weight and centre of gravity of the VitaLite-E and C during
transport.
2.6.3 Storage
Store the product and the separate components in a dry and dust-free environment.
Do not expose products to direct sunlight. Keep the various components in their
original packaging for as long as possible. Section "Installation requirements" on
page22 provides a complete overview of the requirements for installing the VitaLite-E
and C.
Please also read the warning in section "pH calibration" on page31. This
warning applies specifically to the transport and storage of the pH sensor.
2.7 Recycling and disposal
When the VitaLite-E and C has reached the end of its service life, you should dispose
of it yourself.
Bear in mind that the pipes may still contain fertilizer residues.
Steps for pumping the pipes empty:
1. Pump the residual fertilizer into labelled containers.
2. Rinse the pipes with plenty of water.
3. Dispose of the containers in the prescribed manner.
VitaLite
17
To Next Page
Loading...