Avoid exposure to direct sunlight (5).
Avoid exposure to hazardous substances (6).
Avoid exposure to unnecessary vibrations (7).
Make sure that there is sufficient ventilation due to the possible accumulation of
harmful vapours (8).
Make sure that there is sufficient light to operate and maintain the unit.
Make sure that there is sufficient space around the unit to operate and maintain
it.
To prevent damage during transport, certain components are:
not fastened tightly. If necessary, tighten the couplings.
shipped separately. Make sure that these components are installed
correctly.
Figure 4-1: Illustrations showing installation requirements
4.1.3 Water installation requirements
Figure 4-2: Water installation requirements
HortiJet Pro
23
To Next Page
Loading...
