46
Android APP Instruction
2.1 Mobile Phone APP Installation
Only RD6012P-W supports WIFI connection. If you want to use the APP, you need to order a WiFi
board.
This App only supports Android 5.0 to Android 10.0 operating system, and there may be
incompatibilities problems between APP and operating system, please install and test the software
before buying the product. It will apply for location service, please agree and turn on the location
service. After downloading the mobile APP zip-file, please install the APP from file manager. Don’t
install or remove Wi-Fi module when the powered on, otherwise it will be damaged. This
instruction is made for version 1.0.9, there will be little difference between different versions, and
we do recommend you to download the latest APP for better experience.
2.1.1 APP Download
You can download the APP in Google Play by searching “RDPower”.
You can also download the RD60XX APP zip-file in this URL:
https://drive.google.com/drive/folders/1V0l6P1sIJilN1yBOsTO9YGLVdkuO0cX9?usp=sharing
If you cannot find the app in both ways, contact the seller to get it.
2.2 Installation Introduction
Android APP download and connection video instruction:
https://drive.google.com/drive/folders/15GfqS3vN3prvdVYOT1_yGHjkz0jHk_LO?usp=sharing
2.2.1 APP Update
Click the APP icon, After the APP starts, it will automatically detect whether there is a new
version, and it will remind you by popping the window. You need to check if there is a new version
by manual detecting. If you download the APP from Google Play, you need to detect new version by
yourself.
2.2.2 APP Interface Display
When finish the installation and succeed in connection, it will show the main page as shown in the picture
below.
To Next Page
Loading...
