54
3.2.3.2 Proper Wi-Fi Connection
When power on RD6012P, it will connect Wi-Fi first, and then detect if it can be connected to
APP, and it may not be connected successfully if the phone is under screen-lock status or the APP is
running at the background. If the IP address of the phone has changed, you need to press the
button and then press button to reset the net, repeat 2.2.3.1 operation.
3.2.3.3 APP Operation
IOS APP operation video:
https://drive.google.com/drive/folders/1kwycXmbV_wkSYuT7KxuYsmXHV70KDyiq?usp=sharing
Click “DH” / ”DI” text label and enter the value to set the output voltage/ output current, then
click at the blank area to return, if you enter a value exceeds the limit, it cannot be applied. Click
“DB” to exports the voltage-current curve to excel file, up to 24 hours document can be recorded.
Click the “EB” personal center to set the software language or get help to use the APP.
To Next Page
Loading...
