60
every step between 1 and 9999 seconds, you can set 200 steps max, it can output automatically or
manually. You cannot choose other operation page when it performs programming output or other
operations, you can only switch other page when it ends.
4.3.4 RS485 Multiple Devices Communication
Use USB to 485 module to connect the AB of the 485 module, if you have multiple device,
connect their AB together. Each RD6012P needs a different device address, up to 32 units can be
connected, and different models cannot be connected at the same time. The host computer enters
the RS485 multi-computer communication, first click search, and click connect after the search is
completed.
The output voltage and current of a product can be changed arbitrarily in the table, and the
voltage and current can be set in batches in the custom setting. You can set several groups of
shortcut voltage and current in the shortcut setting for easy recall. Due to the communication frame
interval, it takes a certain time to complete each operation, and the longest is no longer than 11
seconds.
To Next Page
Loading...
