Riden RD6006 - Page 49

48
RD6012P will wait for the phone to connect as shown in Figure 16. Press “BA” (add device) and
choose “RD power series”, it will show like Figure 17, then enter the WiFi password and confirm you
are using 2.4G network as shown in Figure 18. Press “INITIALIZATION” and wait 10 seconds
Figure 17
Figure 18
RD6012P will obtain the IP address of your phone(Figure 19), if it
shows right, confirm that “device display sever IP”, and click
“Confirm”, wait 20s (Figure 20)，APP show connection successful,
RD6012P will start automatically, the network distribution success,
return to the main page and click the connect in the “BB”.
Figure 19