Rigol DG1022

RIGOL DG1000 Command System
Programming Guide for DG1000
2-16
Detailed information of each command:
1. FREQuency
Syntax FREQuency {<frequency>|MINimum|MAXimum}
Function Set the frequency of output function for CH1.
Explanation <frequency> is the frequency set by user, the default unit is Hz.
MIN is the minimum frequency available for the specified function,
MAX is the maximum.
Example FREQ MIN
2. FREQuency?
Syntax FREQuency? [MINimum|MAXimum]
Function Query the frequency of output function of CH1.
Return Value The query returns the frequency set in scientific notation and in
Hz, such as: 1.000000e-06.
3. FREQuency:CH2
Syntax FREQuency:CH2 {<frequency>|MINimum|MAXimum}
Function Set the frequency of output function for CH2.
Explanation <frequency> is the frequency set by user, the default unit is Hz.
MIN is the minimum frequency available for the specified function,
MAX is the maximum.
Example FREQ:CH2 MIN
4. FREQuency:CH2?
Syntax FREQuency:CH2? [MINimum|MAXimum]
Function Query the frequency of output function of CH2.
Return Value The query returns the frequency set in scientific notation and in
Hz, such as: CH2:1.000000e-06.
5. FREQuency:STARt
Syntax FREQuency:STARt {<frequency>|MINimum|MAXimum}
Function Set the start frequency (used in conjunction with the stop
frequency) in sweep mode.
Example FREQ:STAR MIN
6. FREQuency:STARt?