Rigol DG1022

DG1000 Command System RIGOL
Programming Guide for DG1000
2-21
V.
Explanation <voltage>is the low level set by users. MIN selects the minimum
low level available and MAX selects the maximum low level
available.
Example VOLT:LOW MIN
6. VOLTage:LOW?
Syntax VOLTage:LOW?
Function Query the low level of waves output from CH1.
Return Value The query returns the low level set in scientific notation, such as:
-1.000000e+01.
7. VOLTage:OFFSet
Syntax VOLTage:OFFSet {<offset>|MINimum|MAXimum}
Function Set the offset voltage of CH1 in V
DC
.
Explanation < offset >is the offset voltage set by users. MIN selects the
minimum DC offset voltage for specified function and amplitude.
MAX selects the maximum value.
Example VOLT:OFFS MIN
8. VOLTage:OFFSet?
Syntax VOLTage:OFFSet?
Function Query the offset voltage of CH1.
Return Value The query returns the offset voltage set in scientific notation, such
as: -9.998000e+00.
9. VOLTage:UNIT
Syntax VOLTage:UNIT {VPP|VRMS|DBM}
Function Set the unit of voltage output from CH1.
Explanation DBM could be used only in non-high resistance.
Example VOLT:UNIT VPP
10. VOLTage:UNIT?
Syntax VOLTage:UNIT?
Function Query the unit of voltage output from CH1.
Return Value The query returns VPP, VRMS or DBM.