Rigol DG1022

RIGOL DG1000 Command System
Programming Guide for DG1000
2-50
 MIN=0.000001, MAX=500.
Example BURS:INT:PER 10
6. BURSt:INTernal:PERiod?
Syntax BURSt:INTernal:PERiod? [MINimum|MAXimum]
Function Query the period of burst in internal trigger mode.
Return Value The query returns the burst period in scientific notation and the
default unit is s, such as: 1.000000e+01.
7. BURSt:PHASe
Syntax BURSt:PHASe {<angle>|MINimum|MAXimum}
Function Set the initial phase of burst.
Explanations  <angle> is the phase set by users, the default unit is degree.
 MIN=-180, MAX=180.
Example BURS:PHAS 150
8. BURSt:PHASe?
Syntax BURSt:PHASe? [MINimum|MAXimum]
Function Query the initial phase of burst.
Return Value The query returns the initial phase of burst in scientific notation
and the default unit is degree, such as: 1.500000e+02.
9. BURSt:STATe
Syntax BURSt:STATe {OFF|ON}
Function Enable or disable burst mode.
Example BURS:STAT OFF
10. BURSt:STATe?
Syntax BURSt:STATe?
Function Query the state of burst mode.
Return Value The query returns OFF or ON.
11. BURSt:GATE:POLarity
Syntax BURSt:GATE:POLarity {NORMal|INVerted}
Function Set the polarity of external gated signal at the [Ext
Trig/FSK/Burst]
conncetor on the rear panel, the default is
NORMal.