Rigol DP1308A - Page 41

Chapter 2 Front Panel Operations RIGOL
User’s Guide for DP1308A
2-19
Figure 2-19 Input interface of the file name
Table 2-2 Explanations of file name input menu
Menu
Explanations
InType
Chinese or English
Focus
Shift cursor among the input box of file name,
virtual keyboard and Chinese show box
ABC(abc)
Switch capital and lower case.
If display “ABC”, lowercase letter and pinyin
could be inputted.
If display “abc”, capital letter could be inputted.
Save
Save system configuration file
Back to save and recall interface
1. Chinese Input
Press InType and select “Ch” to enter the Chinese input interface as the figure
above. Take file name “北京普源” as an example:
(1) Input “北京普源”
 Select character “b” in soft keyboard using direction keys and press OK to
input, then, input “bei” in the same way.
 Press Focus and switch cursor to Chinese input box, then press direction
keys up or down to shift characters until the character “北” appears. After
that, input the whole name file “北京普源” in the same way.
(2) Delete the wrong characters you input
In the process of editing, if press “←”, the characters in display box will be
deleted at first.