(3) Save the file
Press Save to save the file as the specified name and finish editing.
2. English Input
Press InType and select “En” to enter the English input interface as the figure
below. Take file name “newfile” as an example:
Figure 2-20 English Input
(1) Input “newfile”
Select character “n” in soft keyboard using direction keys and press OK to input,
then, input “newfile” in the same way.
(2) Delete the wrong letters you input
Shift the focus cursor to the input box, then select the letter to be deleted using
left/right direction key and press “←” to delete.
(3) Save the file
Press Save to save the file as the specified name and finish editing.
NOTE
The length of Chinese file name must be less than 6 characters and the
English name must be less than 12 letters (including number).
To Next Page
Loading...
