Rigol DP800 Series Programming Guide

RIGOL Chapter 2 Command System
2-2 DP800 Programming Guide
:ANALyzer Commands
The :ANALyzer commands are used to set the analyzer parameters, execute analysis and query the analysis
results.
Command List
[1]
:
 :ANALyzer:ANALyze
 :ANALyzer:ENDTime
 :ANALyzer:FILE?
 :ANALyzer:MEMory
 :ANALyzer:MMEMory
 :ANALyzer:OBJect
 :ANALyzer:RESult?
 :ANALyzer:STARTTime
 :ANALyzer:VALue?
:ANALyzer:ANALyze
Syntax :ANALyzer:ANALyze
Description When receiving this command, the instrument executes the analysis operation
according to the current setting.
Explanation You can send the
:ANALyzer:RESult? command to view the analysis results.
Related
Command
:ANALyzer:RESult?
Note
[1]
: In the “Command List” in this manual, the parameters in the setting commands and the query
commands are not included and you can refer to the complete introductions of the commands in the text
according to the keyword.

Rigol DP800 Series Specifications

General

Brand	Rigol
Model	DP800 Series
Category	Power Supply
Language	English