Rigol DP800 Series Programming Guide

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-45
:RECorder[:STATe]
Syntax :RECorder[:STATe] {ON|OFF}
:RECorder[:STATe]?
Description Enable or disable the recorder.
Query the status of the recorder.
Parameter
Name Type Range Default
{ON|OFF} Bool ON|OFF OFF
Explanation  When the recorder is enabled, you cannot set the record period and storage
directory. The instrument samples and records the output of each channel at
the time interval equaling the current record period.
 During the recording, make sure that the output of each channel is enabled.
For the channel of which the output is disabled, the corresponding recorded
data will be 0.
 When the recorder is disabled, the recording finishes and the instrument stores
the record file to the storage directory currently set.
Return Format The query returns ON or OFF.
Example :REC ON /*Enable the recorder*/
:REC? /*Query the current status of the recorder and the query returns ON*/
Related
Commands
:RECorder:DESTination?
:RECorder:MEMory
:RECorder:MMEMory
:RECorder:PERIod

Rigol DP800 Series Specifications

General

Brand	Rigol
Model	DP800 Series
Category	Power Supply
Language	English