Rigol DP800 Series Programming Guide

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-13
IEEE488.2 Common Commands
Command List:
 *IDN?
 *RCL
 *RST
 *SAV
 *TST?
*IDN?
Syntax *IDN?
Description Query the ID character string of the instrument.
Return Format The query returns the ID character string of the instrument, for example, RIGOL
TECHNOLOGIES,DP831A,DP8A000001,00.01.01.
*RCL
Syntax *RCL {1|2|3|4|5|6|7|8|9|10}
Description Read the instrument state stored.
Parameter
Name Type Range Default
{1|2|3|4|5|6|7|8|9|10} Discrete 1|2|3|4|5|6|7|8|9|10 None
Explanation  The power supply provides 10 storage locations (numbered 1 to 10) for
instrument states. This command reads the instrument state stored in the
specified location.
 This command is only available when the specified storage location contains a
state file.
Related
Command
:MEMory[:STATe]:LOAD
*RST
Syntax *RST
Description Restore the power supply to factory state (refer to
Appendix B: Factory Setting) and
clear the error queue.
Related
Commands
:PRESet:KEY
:PRESet[:APPLy]

Rigol DP800 Series Specifications

General

Brand	Rigol
Model	DP800 Series
Category	Power Supply
Language	English