Rigol DP800 Series Programming Guide

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-69
:TIMEr:TEMPlet:INTErval
Syntax :TIMEr:TEMPlet:INTErval <value>
:TIMEr:TEMPlet:INTErval?
Description Set the time interval.
Query the current time interval.
Parameter
Name Type Range Default
<value> Integer 1 to 99999 1
Explanation The interval refers to the time required for the instrument to output each group of
timer parameters created using the templet currently selected.
Return Format The query returns an integer from 1 to 99999, for example, 15.
Example :TIME:TEMP:INTE 15
:TIME:TEMP:INTE?
Related
Command
:TIMEr:TEMPlet:SELect
:TIMEr:TEMPlet:INVErt
Syntax :TIMEr:TEMPlet:INVErt {ON|OFF}
:TIMEr:TEMPlet:INVErt?
Description Enable or disable the invert of the templet currently selected.
Query whether the invert of the templet currently selected is enabled.
Parameter
Name Type Range Default
{ON|OFF} Bool ON|OFF OFF
Explanation When the invert is enabled, the instrument will first turn the preset waveform
upside down and then create timer parameters.
Return Format The query returns ON or OFF.
Example :TIME:TEMP:INVE ON
:TIME:TEMP:INVE?
Related
Command
:TIMEr:TEMPlet:SELect

Rigol DP800 Series Specifications

General

Brand	Rigol
Model	DP800 Series
Category	Power Supply
Language	English