Rigol DP800 Series Programming Guide

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-47
[:SOURce[n]]:CURRent:PROTection[:LEVel]
Syntax [:SOURce[n]]:CURRent:PROTection[:LEVel] {<current>|MINimum|MAXimum}
[:SOURce[n]]:CURRent:PROTection[:LEVel]? [{MINimum|MAXimum}]
Description Set the overcurrent protection limit of the specified channel.
Query the overcurrent protection limit of the specified channel.
Parameter
Name Type Range Default
[n] Integer 1|2|3 1
<current> Real
Current range of the
current channel
Maximum current of the
current channel
Explanation  When the overcurrent protection function is enabled, the output turns off
automatically when the output current exceeds the overcurrent protection limit
currently set. You can send the
:OUTPut:OCP:QUES? command to query
whether overcurrent protection occurs to the specified channel currently.
 The function of this command is equivalent to that of the
:OUTPut:OCP:VALue
command.
 When [:SOURce[n]] is omitted, the command sets the parameter of the
channel currently selected by default.
Return Format The query returns the overcurrent protection limit, for example, 5.0000.
Example :CURR:PROT 5
:CURR:PROT?
Related
Commands
:OUTPut:OCP:QUES?
:OUTPut:OCP[:STATe]
:OUTPut:OCP:VALue

Rigol DP800 Series Specifications

General

Brand	Rigol
Model	DP800 Series
Category	Power Supply
Language	English